Max flow (m³/h) : 6880

Working point: 5000m³/h@375Pa

Power (kW); 0,75

Speed (rpm): 1410

Imax (A) 230V / 400V: 2.83 / 1.63

Dimensions (mm):

ØD = 485

E = 668

F = 555

G = 293

N = 364

R = 530

Weight (kg): 84

CENTRIFUGAL FAN, FOR CLEAN OR SLIGHTLY DUSTY AIR

MANUFACTURING FEATURES

• Medium pressure centrifugal fan with direct coupling.
• Reinforced housing made of carbon laminated steel, protected against corrosion by powder coating polyester resin RAL 5010. Finish C3.
• Casing fully latched and adjustable.
• Self-cleaning turbine and reinforced impeller with high-performance backward (reaction) blades made of carbon laminated steel dynamically balanced to minimize noise and vibrations. Black painted RAL 9005
• Squirrel cage standardized asynchronous IEC motor with IP-55 protection and class F electrical insulation. Standard voltages 230/400V 50Hz for three-phase motors up to 4kW and 400/690V 50Hz for higher powers.
• Motor with feet (B3) supported on motor support foot.
• Models of size 500 and above are supplied with a front support foot, for the other models the front support foot is optional.
• Available in the following orientations (to be indicated in case of order): LG0, LG45, LG90, LG135, LG180; LG225, LG270, LG315, RD0, RD45, RD90, RD135, RD180; RD225, RD270, RD315.
• Maximum working temperature in continuous: air transported: 130ºC,
Environment: 60ºC.

APPLICATIONS

Suitable for moving clean or dusty air. Designed to be installed in conduit for suction or impulsion.

         Paint booths
         Collection of dust
         Food industry dryers
         Food processing
         Incineration
         Odor control in industry
         Indoor / outdoor pollution control
         Big buildings
         Malls
         Factories / Industrial buildings
         Warehouses
         Extraction of smoke
         Boilers and ovens
         Manufacture and treatment of chemical products.
         Tunnels, underground stations.

ON DEMAND


· Fans for special voltages.
· 2 speed motor.
· C4 or C5 coating painting
· Hot dip galvanized
· Inox 304 (normal or electropolished finish)
· Inox 316 (normal or electropolished finish)
· Cooling wheel
· Anticaloric paint
· Fully welded housing (waterproof)
· Inspection door to facilitate maintenance and cleaning
· Drain plug.
· Airtight axle
· Non-sparking air passage and standard motor